Tohodo Scientific Instrument - Jual Alat Pertanian dan Alat Perikanan
Verified Supplier
Tambah ke Favorit

TI-25MX Wall Thickness Test Equipment

Last Updated
21 Sep 2021
Minimum Order
1 Unit

Specification of TI-25MX Wall Thickness Test Equipment

TI-25MX Wall Thickness Test Equipment
TI-25MX is a wall thickness tester and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - only from one side.

Ultrasonic Thickness of Wall Gauge Complete Kit with T-102-3300 Probe
Total Measuring Range (depending on material and transducer / probe type)
0.025-36,000 inches
, 63-914.4 mm
Measuring Range on Steel (with standard T-102-3300 probe)
0.025-6.00 inches
, 60-150.0 mm

Check-Line TI-25MX Wall thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - only from one side! This can measure thickness up to 36 inches (915 mm), depending on the material and transducer. TI-25MX combines the best features of TI-25SX allowing operators to choose from 8 predefined ingredients and the speed of the custom material 2 Program.
The materials that have been determined are as follows:
1. Steel 4340
2. Stainless 303
3. Aluminum 2024
4. Cast Iron
5. plexiglass
6. PVC
7. Polystyrene
8. Polyurethane
9. Custom1
10. Custom2
In addition, the user can adjust the desired speed and calibrate to known thickness samples ---- the optimal acoustic speed is automatically calculated. In special circumstances, to optimize linearity through various, users can perform 2 point calibration for two known thickness samples. Optimal speed is automatically calculated to provide the highest accuracy and linearity between low and high calibration points. Calibration and other setup parameters can be locked to prevent accidental adjustments.

TI-25MX can be used in Single Reading Thickness mode or in Scan mode, where the probe is dragged in a large measurement area. The minimum thickness readings recorded during "scan" will be displayed.
TI-25MX probes are waterproof and can be submerged in water. The index is an impact-resistant and sealed environment (IP65) to provide trouble-free operation under the toughest field conditions.

Complete Kit:
TI-25MX is provided as a complete kit with gauge, probe, 4 oz. liquid bottle couplings, 2 AA batteries, NIST-traced Calibration Certificates, and Operating Instructions manually - all in a foam-mounted bag.
Calibration can be locked to prevent accidental adjustments.

Measuring Limits:
Minimum Radius for Convex Surface: 0.350 "(8.89 mm)
Radius Minimum for Surface Concave: 3 "(76.2 mm)
Minimum headroom: 1 "(25.0 mm)
Minimum Sample Diameter 0.150 "(3.8 mm)
Minimum Thickness Substrate - F: na
Minimum Thickness Substrate - NFE: na

Total Measuring Range (Steel): 0.025-36,000 inches, 63-914.4 mm (depending on material and transducer / type probe)
Measuring Range (Steel):
0.025-6,000 inches
0.60-150.0 mm (with standard transducers T-102-3300)
Resolution: 0.001 inches (0.01 mm)
measure mode: Pulse-Echo (PE)
Speed ​​range: 0.0120-0.7300 at / microsecond. 305 for 18,542 meters / second
GAIN Adjustment: 5-position GAIN Adjustable (VLOW, LOW, MED, HIGH, VIII), in 3dB steps, 40-52dB
Probe (Standard): 1/4 ", 5 MHz dual transducer element, wearface is actually 5/8" (17mm), p / n T-102-3300
Probes (optional): 1 to 10 MHz, 3/16 "up to 1 inch (custom probes available)
PEEK (Polyethylethylkytone) Wearface Probe
Cable: 1.2m (4ft.) Waterproof cable with non-polarized, fast-disconnect connector
LCD screen: Multi-function 7 segment 4.5 digit liquid crystal display with 0.500 "high digits. Two 0.125 in14 segment segments for labels and values, and one field 7 segments for labels and values. Additional icons to show features and fashion
Backlight display: Backlight is selected on / off / auto, and brightness is selected (Lo, Med, Hi) Options
Display Update Level: 10 Hz (10 updates / second)
Scan mode: 100 Hz (100 updates / second), Displays the lowest number found during the scan
Temp. limit:
Ambient: -30 to 75 ° C (-22 to 167 ° F)
Material: -20 to 100 ° C (0 to 200 ° F)
high temperature probes available
Battery type: 2x AA battery (rechargeable battery can be used)
Battery life: 45 hours of continuous use
Weight: 308 grams (11 ounces)
Size: 64 x 131 x 32 mm (2.5 "x 5.17" x 1.25 ")
Accessories: Assembly / cable probes, 4 oz. liquid bottle coupling, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic bags.
Housing: Aluminum extrusion body with aluminum nickel-plated cap (sealed gasket)
Pulse Repetition Frequency (PRF): 200 Hz (200 pulses / second)
For Lock Settings: With the meter off, press and hold the "+" button while powering on the gauge
The LOCK icon will light up on Display
To open Settings: With the gauge turned off, press and hold the "-" key while powering on the measuring instrument

Tag: Wall Thickness Test Equipment TI-25MX, cheap selling Wall Thickness Test Equipment TI-25MX, cheap selling Wall Thickness Test Equipment TI-25MX, 

Lihat Selengkapnya

Untuk keterangan lebih lanjut, silahkan download PDF ini :



Foto dari Pembeli

Ulasan dari Pembeli

Dengan Foto
Request a Quote
Produk Siap di Pesan
Rp 0
Logo IDT